Are your appliances experiencing problems? If so, you aren’t alone. The following items are some of the most common appliance problems we encounter. If your appliance is experiencing any of these symptoms, give us a call to schedule a service appointment for a proper diagnosis and repair by a dependable, professional, trained technician. While some of these symptoms may be a minor inconvenience, most of them will result in more problems if not properly repaired.
“Refrigerator not cooling?” is one of the most frequent service calls we receive. Most owners have already determined the unit must be low on freon. However, this is rarely the case. Usually the inability to cool is due to an airflow problem. There are several possibilities for the problem that may include fan issues, obstructions to the air flow vents, a cracked or worn out door seal, or compressor weakness or failure. The compressor may be fine, but just needs some attention.
Defrost not working.
Not only is manually defrosting your refrigerator an inconvenience, but it is also an indication of other problems with your refrigerator. By the time you notice frost or ice built up in your freezer, the entire coil system behind the scenes is frozen over. This ice buildup can break parts and crack the plastic walls of your appliance.
Water leaking inside the unit or onto the floor.
Leaking water may be coming from either your water supply or a clogged drain. When the drain is clogged, the water can run into your appliance instead of into the drain pan. Nothing but water should be able to get to the drain pan.
Not making ice or dispensing water.
Not being able to utilize the automatic ice and water dispenser is not only an inconvenience, but an indication of more serious issues with the appliance. If you’re not getting any ice, the problem could be as simple as an inexpensive cog replacement. If there is no water present and you have good water supply to the refrigerator and a good filter in place, you may have an inlet valve that isn’t functioning properly.
Unusual noises, such as clicking and squealing sounds, are often the result of evaporator or condenser fans starting to go out. Metallic pings or taps can be indications of compressor problems. If you notice more than the quiet hum of a fan motor and the routine dropping of ice from the icemaker into the ice bucket, you should contact a qualified service technician. A part that is about to go out can result in additional problems if not resolved.
How often do I need to change my water filter?
Filtered water provides you and your family with great tasting ice and water. But the key to continue having the best tasting and cleanest filtered water is to follow a regular maintenance schedule for your fridge filter. If your refrigerator’s “change filter” light is on or if your automatic water dispenser is s‑l‑o‑w‑l‑y dispensing water, it is past time to change your water filter. Professionals recommend changing your water filter every six months. Contact Richardson Appliance Service to order your replacement filter.
Electric oven not heating properly, one or more stovetop burners not working.
If you notice your oven isn’t heating properly in the bake or broil modes, you may have a heating element or receptacle that needs to be replaced. If your oven is cooking food too fast or too slow, you may need a technician to adjust your oven’s settings. Many ovens have digital displays, and sometimes a faulty control panel may be causing the problem.
Self-cleaning mode doesn’t work.
There are safety controls that can prevent the automatic cleaning mode to work. If this happens, you should contact a qualified technician.
Gas oven won’t light.
Most modern gas ovens have electronic ignitors that replace the pilot light; however, there are still ovens that use pilot lights. Safety features prevent gas from flowing out of the valve if there is nothing to light. If the ignitor is bad, has a bad connection, or the pilot won’t stay lit, you should contact a trained technician.
Error code on digital display.
An error code will give you an indication of what is wrong with your oven IF you can interpret the code. Sometimes the codes are supplied in the owner’s manual; other times they may be located inside the oven control area, but sometimes the codes aren’t available to the consumer. If your oven is displaying a code indicating a repair is needed or if your oven displays a code you don’t’ understand, you should call for service.
Unusual noises can be anything from a warped roller to belt problems. A squeak, rattle, or grinding sound will almost always get worse if left alone.
Dryer does not shut off.
There are several factors that can contribute to a dryer not shutting off. Thermostats, thermal fuses, timers, and circuit boards all work together to cycle a dryer.
Dryer takes too long to dry clothes.
This is probably one of the most common service calls we receive for dryers. Many consumers assume their element may be out. However, most of the time, the dryer may not be venting properly. When a dryer is not venting properly, this can cause lint to buildup and obstruct proper airflow. When lint is built up in the vent hose, this is often an indication that there is also lint built up in the dryer itself. Lint can cause your dryer to work harder and increase your utility bills. Lint is also flammable and can start a fire. According to the National Fire Protection Association’s website, the leading cause of home clothes dryer fires is failure to clean them. That is why it is crucial to clean your lint filter after every load and to regularly have your dryer serviced. Contact Richardson Appliance Service to inquire about our appliance maintenance program. Let a trained service technician thoroughly clean and inspect your dryer today.
Gas odor when operating dryer.
Obviously, no one wants to take chances when gas odors are present. Turn off the gas valve and immediately call for service any time you smell gas from an appliance.
Water leaking is one of the most common reasons for a dishwasher service call. From the time the water enters the dishwasher to the time it drains out of the unit, there are multiple places for a leak to develop. If you notice water leaking from your dishwasher, call immediately for service. Not only is a water leak an indicator of an appliance problem, but it can cause significant damage to the surrounding area.
Doesn’t fill or drain properly.
If your dishwasher isn’t filling or draining properly, there may be water pressure issues or your pump might not be fully functioning. The problem may be something as simple as an object hung in your dishwasher’s pump.
Dishwasher doesn’t clean dishes.
Why have a dishwasher if you have to wash your dishes by hand before putting them in the dishwasher? If you find yourself doing this, call Richardson Appliance Service for a thorough diagnosis and repair by a trained technician.
Microwave doesn’t come on at all.
A blown fuse can trip a breaker, so it’s important to check your breaker box before calling for service. Also, if a door safety switch isn’t activating, this can cause the unit not to run.
Microwave runs, but doesn’t heat.
This is usually an indicator of magnetron, safety fuse, or electronic control board issues. If the appliance is making a loud buzzing sound, there is a faulty electronic component.
The turntable doesn’t spin.
The turntable is turned by a motor with a plastic cog attached, and the motor is controlled by an electronic control board. If your microwave’s turntable isn’t spinning when the unit is running, there may be issues with any of these components.
The vent doesn’t work on an over-the-oven microwave.
There may be issues with the vent fan motor or fan control switch.
The icemaker doesn’t make ice or doesn’t make enough ice.
Making ice only requires two ingredients: water and freezing temperature. Believe it or not, the refrigerator’s water filter can affect your icemaker’s ability to produce ice. However, there are other factors that contribute to this problem. Call Richardson Appliance Service to order a replacement filter and to schedule a trained technician to determine the cause of your icemaker’s problem.
Ice is small or malformed.
This problem is more than likely a water issue. However, sometimes the components can crack or break causing weird ice shapes, small cubes, and even leaks into the freezer.
If you notice more than just the regular sound of ice dropping into the bucket, there are probably other issues going on with your icemaker. Contact Richardson Appliance Service to schedule the repair or replacement of your icemaker.
Ice machine isn’t making ice, dropping ice, or ice is too wet or thin.
There are several factors that go into the production of ice. Preventive maintenance is crucial to ice production. Plus, if you could see the interior components of an ice machine that hasn’t been thoroughly cleaned, you’d definitely skip the ice. At Richardson Appliance Service, we have a separate maintenance program for ice machines. Contact us to inquire about our ice machine maintenance plan and to schedule your appointment.